Asenware AW-CFP2166-4 zone conventional fire alarm control panel

FEATURERS

1. Automatic power switchover Dimensions (mm) & Weight (kg)
2. 12V2.3Ah High-capacity batteries
3. Fault supervision and notification
4. 2 relay output circuits
5. 2 sounder output circuits
6. Sounders and panel buzzer silence
7. Extensible application for GSM
8. Meets all requirements of latest EN54 part 2 and EN54 part 4

Specification

• Model: AW-CFP2166-2/4
• Main Voltage: 220VAC 50HZ/60HZ
• Batteries: 2*12V/ 2.3Ah sealed lead acid gel, self-regulated
• Battery low-voltage protection: 21V
• Detectors connection allowed each zone: 20 detectors (except MCPs)
• Zone alarm current: 6mA minimum/ 27mA maximum
• Sounder output: 2*0.2A maximum
• Relay contacts rating: 1A @30VDC
• Communication protocol: 2 wires RS485 bus system
• EOL resistor for zone and outputs: 6.8K ohm 1W
• Environmental: Class A temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing
• Fuse for AC Power: 1 A/ 250V glass tube fuse slow blow 5 X 20mm
• Fuse for DC Power: 1 A/ 250V glass tube fuse slow blow 5 X 20mm
• Terminal blocks rating: All terminals rated for 12 to18 AWG(0.75 to 2.5 mm²)
• Certificate: LPCB
• Size: 32cm*9.4cm*23cm
• Weight: 5KG