Honeywell Horn & Strobe, UL (SYS/HS)
September 27, 2021Kentec Apollo Sigma CP – Four Wire panel(Resistor EOL), no LCMU, surface enclosure 2 Zones (K11020 M2)
September 27, 2021Honeywell Addressable reflector-type linear optical beam (MI-LPB2-S2I)
Model: MI-LPB2-S2I
Quick Overview
· Addressable loop powered beam detector
· Rotary decade address switches
· 10-100m range (from 70 to 100 m requires 6500-LRK)
· 4 fixed sensitivity levels
· 2 automatic variable sensitivity modes
· Numerical indicators to aid beam alignment
· Standby, Fault and Alarm LED indicator
· Specifications: EN54-12, EN54-17
· BRE approved
Description
Morley IAS MI-LPB2-S2I Addressable Optical Beam Detector 10m-70m
The MI-LPB2 is an addressable reflector type linear optical beam smoke detector, designed to operate as a component of an intelligent fire alarm system. It operates primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses, atriums etc.
The MI-LPB2 detector is a combined transmitter/receiver unit that can be directly connected to an analogue loop circuit. The Infra-Red transmitter generates a beam of light towards a high efficiency reflector.
The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition. Alignment of the detector is simplified with the aid of the detector’s “gunsight” targeting device. Alignment of the detector with the reflector can then be “fine-tuned” with the aid of a numerical signal strength indicator.
Key Features:
- Combined transmitter and receiver unit
- Range 10-100 metres using the long range reflector kit
- 4 x fixed sensitivity/threshold levels
- 2 x automatic variable sensitivity modes
- Operates in the Infra-Red light spectrum
- Numerical indicators to aid beam alignment
- Standby, fault and alarm LED indicators visible from the front and bottom
- ±10° horizontal and vertical beam alignment
- Automatic drift compensation
- Loop powered
- Complies to EN54-12
- Extended Warranty
Technical Specification
- Operating voltage: 15 … 32 V DC
- Humidity range: > 95% (non-condensing)
- Dimension: H: 254 mm W: 190 mm D: 84 mm (Tx/Rx Unit)
H: 230 mm W: 200mm D: 84 mm (single, 10-70m range) - Weight: 1.77 kg
- Color: white (Trim), black (back-box)
- Temperature range: -30°C to +55°C
- Max. wire guage: 2.5 sqmm
- Material Bayblend FR110 (trim), Lexan (lens cover), Noryl (back-box)
- Rated voltage: 24 V DC
- Typical standby current: 2mA @ 24Vdc
- Max. alarm current: 8.5mA
- Max. alignment current: 20 mA